27 February 2011

Enable Internet on VMware

The default settings on VMware don't allow the virtual machine to access the internet. To do this, you will need to share you hosts internet with your guest machine's internet.

Instructions

1. Open VMware Player. On the left column, single-click on the machine you want to enable internet on (it should become highlighted with blue).


2. On the blue VMware bar, press Virtual Machine > Virtual Machine Settings.


3. On the left column, click on Network Adapter. Then under Network connection, change Bridged to NAT. Click OK.


Now boot-up into the machine and the internet should work now.



13 comments:

  1. Your are the best Man. Many thanks...

    Kernelman from Montreal.

    ReplyDelete
  2. i tryed then also not working!!!]

    ReplyDelete
  3. it is not working for me as well!!!!!!!!!

    ReplyDelete
  4. No working to mee too !!!

    ReplyDelete
  5. Not working for me....what setting should we do inside Mac Network?

    ReplyDelete
  6. is it working xcode and sdk on pc. pl help me
    shahidfurqan2003@yahoo.com

    ReplyDelete
  7. Thanks a lot..its working.

    ReplyDelete
  8. To all those who cannot access their internet:
    Instead of NAT, put it to Bridge and check Replicate physical network connection state. It worked for me.

    ReplyDelete
  9. Remember to set a default gateway!

    ReplyDelete
  10. Suppose someone gave you a pen — a sealed, solid-colored pen.You could not see how much ink it had D3 Gold, think Positive Thoughts Every Day Buy D3 Gold, the brightest future will always be based on a forgotten past, you can't go on well in life until you let go of your past failures and heartaches Cheap D3 Gold.

    ReplyDelete
  11. c9 moneyexperience is a hard teacher because she gives the test first, the lesson afterwards, c9 gold the consequences of today are determined by the actions of the past. To change your future, alter your decisions today c9 online gold.

    ReplyDelete